Wooden gates and timber garage doors handcrafted to your own sizes!

The first thing to consider when placing an order with us for your gates is the width required. Generally wooden gates would be fitted in an existing opening, either between walls or wooden posts (either fixed to a wall or sunk into the ground). To manufacture the gates we require the overall opening width (between either the walls or posts if any are present). If your opening appears to be out of plumb then it is always recomended to measure the opening at floor level, middle and top just to be on the safe side and provide us with all three measurements, so we can manufacture the gates to suit less the clearances required (We would normally manufacture the gates to the narrowest measurement.). The other measurement we require is the height of the gates, an allowance of at least 2" (50mm) should be made for clearances under the gates, but more maybe required depending on your circumstances.

If you are in any doubt when measuring up for the gates do not hesitate to ring, fax or Email us, we are only too happy to advise.